Ponuka výrobkov Professional Sound AMBIENT SYSTEM

Mini-COM.P.A.S.S. is a self powered bi-amped loudspeaker cabinet that can be used as stand alone or part of a vertical line array. The cabinet utilises 2 D.P.R.W.G. wave guides. This ultra compact loudspeaker system which weights in at only 23 kg has 2 x 1.75” compression drivers and 4 x 5” mid woofers.

Mini-COM.P.A.S.S. is the only compact VLA with variable, asymmetrical horizontal directivity. Steps of 15 degrees can be set between 60 to 150 degrees manually, thus allowing the operator to direct energy where it is required.

There are sixteen possible combinations of horizontal coverage (including asymmetric ones) which can be exploited according to the audience and acoustic properties of the environment in which the sound has to be reinforced. For example, in acoustically difficult venues, it is very useful to avoid reflections from walls. Because the sound only goes directly where it’s needed. Moving the “wings” of the Mini-COM.P.A.S.S. in sixteen possible ways means changing the acoustic radiation conditions each time. No problem - at this point an ingenious but simple sensor-based recognition apparatus comes into play, “informing” the DSP of the position of the “wings”, and on-axis response is automatically corrected in real time.

• Weather resistant models and multiple mounting hardware options
• High frequency sound field offering excellent sound clarity and minimal interference.
• Designed for wide bandwidth response
• Mid-Size Line Array Speakers

The SR-H2L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.

The TOA HX-5 Variable Dispersion Speaker offers a radically different approach to speaker design with four adjustable dispersion angles.

Compact and lightweight enclosure that is perfect for a multitude of applications.

• The SR-A18B is a sub-woofer system designed to be used in conjunction with the SR-A12L or SR-A12S Line array speaker.
• The SR-A18B employs the multi-amplifier drive system and is designed to be used in conjunction with the optional DP-0206 Digital Processor, D-901 Digital Mixer or D-2000 Digital Mixing System.
• 46 cm cone-type
• Crossover Frequency 80 Hz
• Dimension 720 W

Tripla II 5040 is a professional full-range 3-way active loudspeaker system to be tri-amplified. It comprises a low frequency section using no less than four 12” woofers in hybrid reflex/band-pass configuration, a mid section using two high efficiency 8” midrange, loaded by a symmetric wave guide with a square mouth( mounted in a so-called D’Appolito configuration), low compression ratio and low distortion and a high frequency section that uses a compression driver with a 2” throat and 3” titanium diaphragm, with overload protection, loaded by an asymmetric wave guide (also with a square mouth). The wave guides are built in sturdy fibreglass.

The acoustic reproduced bandwidth is 46Hz÷19.3kHz at -10dB, with a great linearity of within +/-3dB from 50Hz to 18.2kHz, for the reproduction of many types of applications.
When triamplified, the system has high sensitivity for the low section 105dBSPL at 1m, 108dBSPL at 1m for the mid section and over 113dBSPL at 1m for the HF section. Driven at maximum peak power, each section is able to produce a maximum peak of 140dBSPL (low), 141dBSPL (mid) and 141dBSPL (high) at 1m.
The maximum allowed power for each section is 800 Watt AES (3.200 peak) for basses, 500 Watt AES (2.000 Peak) for midrange and 150 Watt AES (600 Peak) for high.
Average dispersion from 500Hz to 4kHz is 70° horizontal and 30° vertical, from 500Hz to 10.000Hz is 60° horizontal and 33° vertical for short and medium throw applications. Baltic plywood, strengthened by the complex internal structure and suitably positioned internal bracing to eliminate any resonance of the cabinet’s sides.
The cabinet has 6 fast flying points, that makes vertical or horizontal hanging of numerous units simultaneously extremely easy and reliable, by using the appropriate optional accessories. The front of the enclosure has recessed sockets for fitting an optional trolley, for handling and protecting the fibreglass wave guides during transport.
Ten recessed integrated handles in the side panels of the cabinet are used for a positive grip during handling.

Doppia II 5040 is a professional full range 3-way loudspeaker system, in version “A” for triamping or version “P” for biamping with built-in passive low-loss crossover for the mid/high frequency section. It comprises a low frequency section using two 12” loudspeakers in hybrid reflex/band-pass configuration, a mid frequency section with a high efficiency 10” loudspeaker, loaded by a symmetric waveguide with a square mouth, low compression ratio and low distortion and a high frequency section that uses a compression driver with a 2” throat and 3” titanium diaphragm, with overload protection, loaded by an asymmetric waveguide which also has a square mouth and can be turned through 90° on its axis inside the cabinet in order to change the horizontal /vertical dispersion.

The acoustic reproduced bandwidth is 61Hz÷19.7kHz at -10 dB, with a considerable linearity of within +/-3dB from 79Hz to 18.9kHz, for the reproduction of many types of applications. When triamped, the system has a high sensitivity such as over 102dBSPL at 1m for the low frequency section, 107dBSPL at 1m for the mid section 111dBSPL at 1m for the high section. Driven at maximum peak power each section is able to produce a maximum peak sound pressure of 134dBSPL (low), 138dBSPL (mid), and 139dBSPL at 1m (high).
The maximum allowed power for each section is 400 Watt AES (1.600 peak) for basses, 300 Watt AES (1.200 Peak) for midrange and 150 Watt AES (600 Peak) for high. Average dispersion from 500Hz to 4kHz is 80° horizontal and 70° vertical; from 500 Hz to 10.000 Hz is 70° horizontal and 60° vertical for medium throw applications. The trapezoidal cabinet is built in high quality 15mm Baltic plywood, strengthened by the complex internal structure and suitably positioned internal bracing, to eliminate any resonance of the cabinet’s sides. The black outer finish is in high quality scratch-resistant paint. The cabinet has 6 fast hanging points that makes vertical or horizontal hanging extremely easy and reliable, by using the appropriate optional accessories. The front of the enclosure has recessed sockets for fitting the optional trolley, for handling and protecting the fibreglass waveguide during transport. Six integral recessed handles ensure a positive grip during handling.

Bomber is a compact professional full-range loudspeaker system for biamping, comprising a low frequency section using a 18” woofer in double reflex configuration along with a 15” NdFeB woofer acoustically coupled in direct radiating reflex loading, a mid/high section with a built-in passive crossover using a high efficiency 10” woofer loaded by a mid frequency horn with a low compression ratio and a bottom cut-off frequency of approximately 150Hz, using a compression driver with a 1.41” throat and 3” titanium diaphragm for the high frequencies, loaded by a constant directivity horn manufactured from a single piece of fibreglass that could be rotated by 90°, closely coupled with the former in a single square output mouth. The crossover between mid and high frequencies is a low-loss unit with built-in overload protection.

The system’s uniform directivity from 500Hz to 4kHz has an average dispersion of 90° horizontal and 75° vertical and average wide-range sound coverage from 500 Hz to 10 kHz is 90° horizontal and 65° vertical. The acoustic reproduced bandwidth is 43 Hz to 20 kHz at -10 dB.
The frequency response of the complete system is ±3dB from 52 Hz to 19.2 kHz. Flown in free-field it has high average wide-range sensitivity, producing 102 dBSPL 1W/1m, (138dB SPL peak). When biamplified, the system has high sensitivity for the low section 102dBSPL at 1m, 107dBSPL at 1m for the mid-high section at 1m. Driven at maximum peak power, each section is able to produce a maximum peak of 141dBSPL (low-half space) and 140dBSPL (mid-high) at 1m.
The maximum allowed power for each section is 1,000 Watt AES (4,000 peak) for basses and 450 Watt AES (1,800 peak) for mid- high.
The enclosure cabinet has 6 fast hanging points, interconnected by internal steel bars, has a trapezoidal shape and is built by high quality 15 mm. baltic phenolic glued plywood while the outer finish is in scratch-resistant, waterproof black paint. The front of the enclosure has recessed sockets for fitting the optional trolley, used for handling and protecting the fibreglass waveguide during transport. Eight practical integral handles recessed in the side panels of the cabinet ensure a positive grip during handling. The front grille protecting the only front-mounted loudspeaker consists in a vibration-free painted steel acoustically transparent mesh covered and black painted.

DVS 8  is a wide range 2-way loudspeaker system with passive low-loss crossover. It comprises a 20 cm high power handling woofer for low and mid frequencies and a 1” compression driver for high frequencies, ferrofluid-cooled and loaded with a controlled directivity horn enabling the enclosure to be used indistinctly in either a vertical or a horizontal position to achieve the necessary characteristic of “projecting” the mid frequency range, ensuring greater intelligibility for the speech it reproduces.

The DVS 8 system has phase inversion low frequency loading and a tuned enclosure. The system’s uniform directivity from 500 Hz to 4 kHz has an average dispersion of 90° (horizontal) and 110° (vertical).

The maximum allowed power is 250 Watt AES (1000 peak).

The encl;osure cabinet has a tarpezoidal shape and is built by high quality 15 mm. baltic phenolic glued plywood further strenghtened by bracing glued inside, which also eliminates any resonance of the sides while the outer finish is in scratch - resisitant, waterproof black paint.

The new Outline Genius M412 matrix is the integrated solution for the control of complex audio systems, with the possibility of simultaneously processing 4 inputs and no less than 12 outputs, all in the space of just one standard rack unit. Thanks to its highly dynamic converters (120dB) and very low distortion (-100dB), as well as a very high performance computation unit based on a SHARC® processor, Genius M412 guarantees great functionality and exceptional quality.

The SHARC® twin unit floating-point processor, with a power of 400 million operations per second, enables to provide each channel
with all the necessary processing for trouble-free optimisation of the operation and performance of a pro audio system, even if very complex. Each input channel has delay and 6 parametric filters
to adjust response and tone; and can be routed to one or more outputs and mixed with the other inputs.

Each output is fitted with crossover, parametric and High/Low Shelving filters, to correct the frequency response of the individual channels; polarity, phase and “time-align” control enable to set correct alignment. The particularly effective output signal limiting and compressing can be used on separate bands.
The system’s entire configuration can be completely controlled via PC, using a network interface, preset to be remote controlled with wireless systems. An unlimited number of units can be daisy-chained and controlled with just one PC.
The powerful control software, developed entirely in Outline labs, automatically scans the network at start-up and recognizes all OUTLINE devices connected, displaying images showing their types. Selecting one of the displayed devices gives access to its configuration (see sample images). The block diagram displayed allows intuitive access to the numerous functions available. It’s also possible to display the filtering sections’ operation in real time on Bode plots.
Thanks to its impeccable sound quality and exceptional flexibility of use - but also for its effective control software, entirely developed in the Outline labs - Genius M412 is one of the most advanced units available on today’s pro audio market.

A reliable and easy to use solution for transporting mic or line-level audio signals over IP-based local and wide area networks (LAN/WAN), as well as the Internet. Applications include wide area paging, background music or messaging audio distribution for airports, convention centers, railway stations and transit systems.

NX-100 transports variable bandwidth, bi-directional audio, up to 14 kHz, as well as serial RS-232 and contact closure data. Each half-rack sized unit includes a balanced mic/line input and output and a 10/100BaseT Ethernet jack for connection to standard network hardware. The rear panel includes eight programmable trigger inputs to initiate and terminate audio transmissions, eight programmable ope